Ford Raptor 1/10 2WD Replica Truck RTR with TQ 2.4GHz Radio System and XL-5 ESC (Fwd/Rev) Includes 7-Cell NiMH 3000mAh Battery and 4-amp USB-C Charger w/ iD - Fox

Clipless Body Mounting High-flying stunts won’t upset Raptor’s tough clipless body. Locking tabs hold the body tightly, but release in just seconds to access the chassis. Raptor's hidden latching system maximizes convenience and scale realism by removing traditional body clips which would interrupt the body’s clean lines.

XL-5^™ Waterproof Electronic Speed Control The waterproof XL-5 electronic speed control handles the elements while smoothly supplying power to the motor. The XL-5 features three throttle profiles, low voltage detection, Thermal Shutdown Protection, 6-7 cell NiMH and 2-cell LiPo compatibility, and built-in BEC. High frequency operation combined with ultra-low resistance make the XL-5 an efficient and ultra-smooth fully proportional speed control. The exclusive and patented Training Mode^™ reduces the overall power output of the XL-5 by 50%, making it easier for young or new drivers to develop their control skills before unleashing full-power.

• Innovative waterproof design
• LiPo and NiMH compatible with two-stage low-voltage detection
• Three Drive Profiles
  • Sport Mode - Forward / Brake / Reverse
  • Race Mode - Forward / Brake
  • Training Mode^™ - 50% Forward / Brake / 50% Reverse (patented)
• 12-Turn motor limit for 550 size motors
• 15-Turn motor limit for 540 size motors
• Integrated on/off switch
• Traxxas EZ-Set^® one-button setup
• High-efficiency MOSFET transistors

Titan^® 12-Turn 550 Modified Motor Raptor's powerful Titan 12T 550 motor is made for dirt-roosting torque, lightning-quick acceleration, explosive jumping, and just about any other 4-wheel fun that demands real horsepower. The Titan's oversize armature features 12 turns of pure copper wire for big torque and increased power-handling. The integrated cooling fan pulls cool air through the motor to keep temperatures down for more fun behind the wheel. The Titan 12T requires very little maintenance and provides consistent torque and high speeds run-after-run.

Brushless Ready

The full-size Ford^® Raptor^® is built for extreme horsepower—so is the Traxxas replica! Velineon^® brushless horsepower (sold separately) simply bolts in to boost speed to 40+ mph. Add a 11.1 V Traxxas Power Cell LiPo battery and you have the potential to double your speed--over 60 mph! Bigger roosts and longer hang-times are right at your fingertips. The included steel transmission gears, full ball bearings, and high-quality metal turnbuckle links are the winning setup for brushless durability. The factory-installed planetary differential is Traxxas-tough with hardened steel gears that never need adjusting! Perfect for long-lasting, all-day fun. Accessory battery hold downs are available for use with large capacity LiPo battery packs that can extend speed and run time. Compare the durability and features to others and you'll see that only Traxxas makes them truly brushless ready.

Traxxas 4-amp USB-C Fast Charger Fast 4-amp charging is available virtually anywhere thanks to the included 45+ watt USB-C battery charger with iD^® technology. The Traxxas iD system is the easiest and safest way to charge your Traxxas batteries. The charger automatically recognizes the iD battery and optimizes the charge settings as soon as you plug it in. There’s no guesswork involved, just fast, reliable charging every time.

Traxxas Power Cell NiMH Battery with iD^® The included iD-equipped 3000 mAh, 8.4 V, Power Cell NiMH battery delivers all the performance that's been engineered into your Traxxas model. Power Cell batteries deliver free-flowing power and maximum punch with premium quality construction. Optional Traxxas iD chargers (sold separately) auto-detect Traxxas iD Power Cell batteries and automatically set and optimize charge settings for unmatched charging safety and simplicity. For even greater speed and runtime, a full line of optional NiMH and LiPo batteries are available.

Precision 2.4 GHz Control Switch on the power and drive! That's all there is to it with the TQ^™ 2.4 GHz radio system. There are no frequencies to manage, so the focus is on having fun. Race multiple vehicles side by side without interference. The TQ's advanced programming provides long-range control with smooth, glitch-free performance. The TQ's ergonomic design is comfortable for all day driving with an internal antenna that is impervious to damage.

Traxxas High-Current Connectors The patented Traxxas High-Current Connectors funnel maximum power to your vehicle’s electronics. Traxxas High-Current Connectors let you get the quickest, safest charge for your battery so you can unleash the maximum power and runtime for your Traxxas vehicle.

Digital High-Torque Waterproof Steering Servo A high-performance truck needs a powerful steering servo for responsive performance. The 2075 waterproof steering servo uses O-ring seals to keep the fun going when things get wet. The Traxxas digital high-torque servo provides precise steering authority and speed for wheel-to-wheel racing in the back yard or on the track.

Sealed Watertight Receiver Box The patented sealed receiver box gives you the freedom to drive where you want, when you want. The antenna and servo wires route neatly through a special water-tight seal. A blue O-ring seals the receiver box to protect the receiver from water. The receiver can be removed for service and aftermarket receivers can be installed without losing the sealing properties of the box.

3-channel Micro Receiver with Fail-Safe Security The TQ 2.4 GHz micro receiver uses an integrated LINK button for fast and easy binding. A two-color LED indicates power-on and bind status for fool-proof control and convenience. In the event of signal loss, the receiver will automatically return the throttle to neutral and hold the last commanded steering position. The fail safe programming is conveniently built-in and does not need to be set or activated.

Long-Wheelbase Chassis The Traxxas Raptor's chassis is shared with the award-winning Slash and features a 13.2″ wheelbase, over 3.5 inches of ground clearance. The chassis includes drain holes and a battery tray channel for routing servo wires to the receiver. Optional electronic speed control mounting bosses are incorporated into the chassis, making it easy to upgrade to the extreme power of the Velineon brushless power system. For race track competition, a transponder mount is located under the front shock tower.

Adjustable Battery Hold Down Raptor can accommodate 6 or 7-cell "flat" and "hump"-style battery packs for unmatched versatility. The extended chassis enables the various battery packs to be positioned forward or backward for front/rear weight bias tuning. An optional battery hold down kit is available for oversized batteries.

Chassis Nerf Bars and New Body Mounts Integrated chassis nerf bars offer side body support for door to door racing action and impact protection. Ruggedly designed body mounts incorporate reinforced washers to support the short course truck body during big-air jumps and high-speed runs.

Scale Front Bumper Engineered to handle the abuse of bumper to bumper bashing, the integrated front bumper is designed to absorb brutal impacts while looking the part of an aggressive off-road-ready truck.

Scale All-Terrain Tires Realistic looks, realistic performance. The rugged tires have excellent grip in the dirt, just the right amount of slide on pavement, and are mounted and pre-glued on impressive 2.2″ wheels with distinctive satin chrome "beadlock" rings and black split-spoke centers.

Adjustable Steel Turnbuckles Factory fitted, heavy-duty steel turnbuckles allow camber and toe tuning. The suspension is completely adjustable right out of the box to fine tune handling agility and high-speed performance. Captured rod ends provide unmatched durability and they simply won't pop off.

Metal Gear Magnum 272^™ Transmission The proven Magnum 272 transmission is assembled with all metal gear internals riding on ultra-smooth sealed ball bearings. Combined with the smooth 48-pitch gears, power is delivered to the rear wheels via durable telescoping U-joint driveshafts for maximum efficiency and articulation. The bulletproof Torque-Control slipper clutch and metal gear Magnum transmission are ready to handle any power system upgrade including the Velineon brushless power system.

Steel-Composite Planetary Gear Differential The composite planetary gear differential now features a steel ring gear with a nylon housing for long life. It uses hardened steel internal gears for maximum strength during rigorous off-road bashing. This type of differential requires virtually no maintenance and its efficient design puts maximum tire-shredding torque to the wheels.

Torque-Control^™ Slipper Clutch The Torque-Control slipper clutch uses special semi-metallic friction material and finned aluminum alloy pressure plates to dissipate heat and provide consistent traction control. The semi-metallic friction material remains stable across a wide temperature range to provide smooth, linear engagement you can count on, run after run. Spur gears can be removed and replaced without altering the slipper adjustment.

Motor Mount with Integrated Cooling Channels The sealed gearbox protects the transmission components from dirt and rocks. The molded motor plate includes finned cooling channels where the motor mounts to the motor plate. The cooling channels work in conjunction with the internal Titan 12T motor fan to pull air through the motor for superior cooling.

Heavy-Duty Yokes with Telescopic Driveshafts Raptor features heavy-duty drive yokes to provide maximum strength and durability to withstand extreme power. The slider driveshafts are extremely durable and allow greater articulation for increased suspension travel.

Included Optional Pinion Gear Raptor reaches its blistering 30+ mph top speed on-road using the optional 23-tooth pinion gear (included) and a 7-cell 8.4 V battery pack. Out of the box, the installed 16-tooth pinion gear is just right for all-around, on- or off-road action.

Hex Hardware Pro-quality, high-grade, metric hex-drive hardware is used throughout for extra strength, and easy maintenance and repair. The black-oxide rust-resistant finish provides a high tech look and feel.

Heavy-Duty Hub Carriers Steering Blocks Raptor features heavy-duty ball bearing front steering blocks and rear hub carriers. They utilize large 5x11 mm ball bearings for long-term precision performance, smooth operation, and increased durability.

Rubber-Sealed Ball Bearings Precision rubber-sealed bearings offer the ultimate in super low-friction performance and maximum protection in dusty environments. They are used in all exposed locations on the truck and are virtually maintenance free.

Oil-Filled Ultra Shocks^™ Raptor's oil-filled Ultra Shocks utilize X-ring technology for a perfect seal and super-smooth performance. They are fully tunable with a wide range of oils, springs, and pistons. Features include pressure bladders for air/oil separation and spring clips to precisely change the ride height and spring pre-load. They can be renewed in minutes with our inexpensive rebuild kits.

Progressive Rate Powder Coated White Springs The race-tuned progressive rate springs soak up the small bumps as a softer spring would, but when the conditions get rough and the jumps get big, the progressive rate springs step up to the challenge by getting firmer as the suspension is compressed. The lwhite powder-coated finish accents the Raptor's rugged off-road styling.

Molded Body Reinforcements Raptor's clipless body latches are neatly integrated into molded body reinforcements that look great and protect the body. Unlike traditional posts and clips, Raptor's body reinforcements spread impact forces over a wide area to minimize the risk of pull-through damage.

  MODEL 58094-8: Fully assembled, waterproof, Ready-To-Race^®, with TQ^™ 2.4 GHz radio system, XL-5^™ electronic speed control, 8.4 V NiMH 3000 mAh Power Cell^™ battery, 4-amp USB-C fast charger, and pre-painted Raptor^® clipless body.

* With 7-cell battery and included optional 23-tooth pinion gear.

 Ford Motor Company Trademarks and Trade Dress used under license to Traxxas. www.fordmotorcompany.com